Ecrin v4.20 - Doc v4.20.01 - © KAPPA 1988-2011
Rubis Guided Session #5: Thermal Option
• Rub
GS05 - 3/24
You can navigate through the different tabs
to check that the
different property values are correct. Finally, click on OK to validate.
B02 • Model Construction: Defining the Reservoir Volumes
B02.1 • Reservoir Lateral Definition: Contour
In the 2D Map tab
, double-click anywhere on the contour to edit its properties dialog:
Fig. B02.1 • Field contour dialog
Set the new geometry to circular, with 800ft radius and accept.
In the current example, we are only interested in modelling thermal effects near the wellbore,
so a small, circular shape is sufficient.
B02.2 • Reservoir Vertical Definition: Defining the Layers
We will now complete the definition of the reservoir shape by setting the number of layers and
their thicknesses.
Call the ‘Reservoir-Geometry’ dialog by pressing on
.
In this dialog, change the number of layers to 10. Then, change the name and the thickness of
each layer, to get the following display:
1...,393,394,395,396,397,398,399,400,401,402 404,405,406,407,408,409,410,411,412,413,...485