Basic HTML Version
Ecrin v4.12 - Doc v4.12.02 - © KAPPA 1988-2009
Rubis Guided Session #1
• Rub
GS01 - 31/33
Click on OK to exit, and display the last stored pressure field by clicking on . Reset the color
scale minimum and maximum values by clicking on first to access the property map display
settings dialog, then
in that dialog to reset the color scale values. The final result should
look like:
Fig. C03.4 • Final pressure field at 5960 ft
Not surprisingly, Rubis shows that the strongest
pressure depletion is located in the vicinity of the
P01 producer. On the other hand, the North-West
region (located on the right in the zoomed region
below) exhibits higher pressure values, due to the
existence of the shale layer that crosses the 5960 ft
depth plane:
Maximize the 2D Geometry plot and set the current
depth to stratigraphic in the “Current Depth” dialog,
.
Select the “Sand” layer.
Set “Sw” as the displayed property, show the initial condition with
, and click on
to
play-back the evolution of Sw with time: