Basic HTML Version
Ecrin v4.12 - Doc v4.12.02 - © KAPPA 1988-2009
Saphir Guided Session #6
•
SapGS06 - 4/7
B01.4 • Running the simulation
Click back on the tab
.
Choose the 'Test Design' option in the
panel.
Check 'add other wells' and 'store result fields', run the simulation with initial pressure
Pi= 5,000 psia
, permeability
kh= 1500 mDft
and initial water saturation
Swi= 0.2
.
See Figure B01.5.
Fig. B01.5 • NonLinear Test Design parameters
The simulated pressure response is illustrated in Figure B01.6.
Fig B01.6 • History plot