Page 198 - KAPPA - Ecrin v4.30 tutorials

Ecrin v4.20 - Doc v4.20.01 - © KAPPA 1988-2011 Saphir Guided Session #6 • SapGS06 - 4/7
B01.4 • Running the simulation
Click back on the tab .
Choose the 'Test Design' option in the panel.
Check 'add other wells' and 'store result fields', run the simulation with initial pressure
Pi= 5,000 psia, permeability kh= 1500 mDft and initial water saturation Swi= 0.2.
See Figure B01.5.
Fig. B01.5 • NonLinear Test Design parameters
The simulated pressure response is illustrated in Figure B01.6.
Fig B01.6 • History plot